Desanders and desilters are solid control equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter. Desander removes the abrasive solids from the drilling fluids which cannot be removed by shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter.
A centrifugal pump is used to pump the drilling fluids from mud tank into the set of hydrocyclones.
Solids control
Desanders have moving parts. The larger the internal diameter of the desander is, the greater the amount of drilling fluids it is able to process and the larger the size of the solids removed. A desander with a (10 inches (250 mm) cone) is able to remove 50% of solids within the 40-50 μm (micrometre) range at a flow rate of 500 US gallons per minute (32 L/s), whilea desilter (4 inches (100 mm) Cone) is able to remove 50% of solids within the 15-20 μm range at a flow rate of 60 US gallons per minute (3.8 L/s). Micro-fine separators are able to remove 50% of solids within the 10-15 μm range at a flow rate of 15 US gallons per minute (0.95 L/s). A desander is typically positioned next-to-last in the arrangement of solids control equipment, with a decanter centrifuge as the subsequent processing unit. Desanders are preceded by gas busters, gumbo removal equipment (if utilized), shale shaker, mud cleaner (if utilized) and a vacuum degasser. Desanders are widely used in oilfield drilling. Practice has proved that hydrocyclone desander is a kind equipment of economic and effective.
Model:CSQ
Brand:AJ
Description:Drilling fluid Desander separator. Hydrocyclone desander mainly separates 47-76microns solid out of drilling fluid.
Brand:AJ
Description:Drilling fluid Desander separator. Hydrocyclone desander mainly separates 47-76microns solid out of drilling fluid.
Features
Sand size solids removal (47~76 microns)
Polymeric cones
Lightweight, compact
Customizable cones configuration as per clients’ need
Lifting eye welded to frame
Sand size solids removal (47~76 microns)
Polymeric cones
Lightweight, compact
Customizable cones configuration as per clients’ need
Lifting eye welded to frame
Benefits
Provide better effect for subsequent process
Provides durable and low cost replacement
Save much space and provide easy handling
More flexible, user-friendly and proper cost
Better to protect equipment when handle and transport
Provide better effect for subsequent process
Provides durable and low cost replacement
Save much space and provide easy handling
More flexible, user-friendly and proper cost
Better to protect equipment when handle and transport
CSQ Desander separator is 2nd phase mud process equipment in solids control system. The cones size and number can be adjusted according to client’s actual capacity requirements. Cones also can be cast iron or other materials. The bottom shaker can be configured or not. We also can design desander with large bottom shale shaker, such as AJS703L, AJS603L etc.
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!
没有评论:
发表评论