Mud Gun?is designed for use in a?solids control?system of a Drilling Rig .It is one kind of special tool which mainly uses for mixing drilling mud in the circulatory system and prevents the mud precipitates. The structure of equipment is simple, flexible Operation and easy using. A mud gun is the ideal equipment to guard against precipitates in a solids control system. The mud gun is installed in a?mud tank.
Furthermore, it is usually used together with mud agitator. They have similar configuration principle on one mud tank?
Simple information on mud gun
The mud gun also can be called mud mixing gun. As we know it is usually used along with mud agitator as mixers for oil rig in mud system.The mud gun is consisted by main construction by steel pipe and flange, the valves (including high pressure or normal pressure), and the rotary parts.
The mud gun is simple in design or structure. Usually all turning takes place on double rows of steel balls in flame hardened races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum.
?
Mud gun types in OGEM
I. Divided by pressure. There will be high pressure and normal pressure.II. Divided by rotary type. There will be with manual rotary or fixed type.
III. Divided by diameter. There will be 2? (NJQ50) and 3? (NJQ80).
IV. Divided by nozzle number. There will be single one and triple one, etc.
V. Divided by valves. There will be gate valve type and butterfly valve type.
?NJQ Mud gun common parameters
NJQ50 holds 2? diameter, and 2? valve can be butterfly or gate valve, then the connector size should be also 2?. The pressure can be normal pressure (0.6Mpa) or high pressure (1.6Mpa), the nozzle number will be customized as 3 or 1. And there will be rotation angle by manual rotation.
There is another common type NJQ80. Almost same with above one just the diameter, valve, connector, etc. dimension will be 3?.
On oil rig drilling mud system, the mud gun is usually fixed in active tank. However, we can design it subject to actual circumstance and situation or requirements by clients. Any questions on mud gun on oil rig in mud system please contact us-OGEM.
Mud gun is another equipment for agitating drilling mud or fluid during mud process. It is mounted on mud tanks.?Mud gun?is also called as jet mud gun, mud gun jets, mud mixing gun, etc. Please find following info on ?both FSI Mud gun and OGEM Mud gun.
OGEM JET MUD GUN DESCRIPTION
- OGEM Mud gun including many types. Subject to the appearance. There will be?Spinner Type / Pivot Type, Non Spin Type,?Single nozzle and triple nozzle type and?Bottom type.
- According to the working pressure or valve pressure, there can be high pressure and normal pressure type. The NJQ mud gun size including 2″ and 3″.?NJQ Mud gun is completely made of steel or S.S requested by clients. The nozzles are customizable on numbers and material.
- The spinner type jet mud gun is designed for using in?mud tanks?where the utmost in constant agitation is desired. The nozzles are set at certain angle. Furnished in any desired length as specified in order.
- While, the bottom type is similar with mud agitator with shaft stabilizer. We’ll set one piece of pipe to fix mud gun bottom small tail to ensure during operation, the mud gun will be steady. It is for large size metal tanks or mud pit. It’s simple construction, easy to install and operate.
- Please be noted, discharge nozzles in all OGEM Jet mud?guns are eqiupped with insert process to make sure wear-resistant and long usable life.
- OGEM suggest you take mud gun together with?mud agitator. Since mud gun can provide complete and overcome the dead corner mud mixing.
- FSI Mud guns and OGEM mud gun the main difference is the cost and the appearance design. In fact, both producers are professional on drilling mud solids control equipment.
If you need more info on any FSI guns or OGEM NJQ Mud gun just contact us freely.
没有评论:
发表评论