How to use the solids control equipment

Install and maintain the desilter is important for drilling works, as a part of solids control.

Steps
1 Install and debug: The slurry cleaner is mainly consisting of vibrating sieve, distributary manifold and swirler, etc. having the slurry exit of the sand pump and pipe elbow of liquid going-in of slurry cleaner connected with 6"rubber hose, pipe elbow of liquid going-in able to circumrotate round the vertical axial line with arbitrary angle. The both ends of overflow pipe of slurry cleaner are symmetrical, which can be used as overflow end for equipping 8" rubber hose for conduction into another tank of drilling fluid.
2 Position the angle. Under ideal working state the spouting angle at the bottom will be 20°～30°.
3 Keep up maintenance. After the equipment has run up to 4000hours, the wearing parts including cone-shaped canister and spiral case, etc. should be checked or replaced.
Tips
Don't start it working right away. No load running should be going for 5~15 minutes after every halt of pump running, with screen cloth cleanly washed in clear water. And it is especially to do so when slurry having big viscosity to be processed with close-mesh screen for processing effect will be impacted because the meshes are blocked by sticky substance and silver sand.
CNQ Hydrocyclone Desilter
Model:CNQ
Brand:AJ
Description:Hydrocyclone desilter is usually set behind Desander separator
Features
Sand size solids removal (12~47 microns)
Polymeric cones
Lightweight, compact
Customized cone configuration specific to customer needs
S.S Clamp and flange type optional
Lifting eye welded to frame
Benefits
Bbetter effect for subsequent process
Durable and low cost replacement
Save much space and provide easy handling
More flexible, user-friendly and proper cost
Provide easy control on treating capacity
Give user convenience on cones installation, etc.
Better to protect equipment when handle and transport
CNQ Desilter separator is one important equipment among whole drilling mud system. Usually separate finer particles after desander hydrocyclones. The bottom shaker is optional to get better filtration effect. For oil dirlling mud solids control, the desilter cones are 4″. According to clients’ requirement the size can be 3″ also. Under proper working pressure, the separation efficiency will be 90~95%. You need more detail and price on desilter? Come to professional maufacturer-OGEM.
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
                                                   
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!