Alternative 400GPM and 500GPM drilling mud recycling system

One proposal for 400GMP Drilling mud system listed

1)400GPM Mud recycling + Mixing System

2)Mud storage Tank Package.

Also another alternative OGEM500GPM Complete drilling mud solids removal system Proposal

1)500GPM Mud Recycling System(8000Lx2300Wx1800H)

2)Mud Mixing System(Mud Tank +Mixing hopper and pump)(8000Lx2300Wx1800H).

Detailed configuration on the system  

1)About the paint on equipments and mud tanks

We always use Japan Kansai & COSCO coating and painting. The Zink-Rich Epoxy painting. For mud tank internal, there will be 2 layers, while for outside will be 3 Layers.

2)The client required the mud system powered by generator, so there should be information on the connection.

How does the generator connect – they prefer plugged since there is no electrician required on site. How does the slurry pump connect to the unit? (again preference is for plugged) and what length of cable is supplied? How are the shakers connected? (preference again is plugged). For Above 3 questions, they are all connected by Aviation plug as we always do. It’s easy for operation. And for cable supplied for slurry pump we can provide free cable no more than 30m.

3)Moreover about all controls of the drilling mud system. All of the labels are described by clear English for easy operation just as we’ve done from beginning. We’ve exported our products to over 20 countries, we must make all of equipments globalized design

A rather important issue. The capacity of the dirty and clean mud tanks. According to our design and client’s actual drilling situation. The dirty Mud will be 1400Gallons,while clean Mud is 2300Gallons. We recommend them to have an extra storage tank to increase total clean mud capacity.

Flexible installation for convenient transportaion

Considering the convenience on assembly and disassembly the whole mud solids control system for transportation and removal. There will be also quick connectors between Desanders, Desilter and the pipelines, the quick connectors are made of stainless steel.

Of course, it is subject to certain requirements from customer. If consider the economical cost and unnecessary removal, kindly suggest use the common flanges and pipelines connected by bolts.

 

They wish there is an option to run a 20m umbilical cable that provide operator control from the drillers panel. We can provide cable connect the general control cabinet but not for each single items such as only for shale shaker, mud cleaner, mud mixing pump, etc.

Option of 500GPM Mud recycling system

What are the options to increase the units treatment capacity to 500GPM?

We just need to change the mud mixing pump position and mount manner. Also the mud tank inner dimension will be about 7.5m. This is much longer than last tank length. We kindly suggest them take mud mixing pump on a separated skid not on the tank. Or it is mounted on the storage mud tank.

And there should be both recycling mud tank and storage mud tank. For the 2 tanks they hold same outsize dimension for convenient transportation   The storage tank only for clean mud insure the maxim capacity.

The other design is the storage mud tank hold mud agitators and mud mixing pump. All the equipments including mud tank, it should be suitable for 40’ container cater to water shipment and their local transportation regulations. So the mud tanks length will not be over8m. All of necessary pipelines and fittings will be prepared well for whole system

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee