There is a number of things to notice when install or use shale shaker with cobra screen.
Placement of equipment should enable the operator to replace the shaker screen in screen on both sides. Suggestions in a round at least 0.6m space. Between the equipment walkways and machine near the channel is very important, in order to facilitate the maintenance of normal.
Equipment preparation: remove the four bolts used in transport and put them in a safe place for standby; check the screen all nuts, bolts and fasteners; check the adjustment pin box for screen angle, to ensure that they are inserted into the appropriate, and the two sides are in the same position; connecting the power installation screen.
Electrical connections: confirm the installation of solids control equipment to ensure the motor voltage and voltage matching; the power cable is connected with the equipment off and make identification; power supply cable installation motor; check the voltage and wiring, and ensure that the connecting fastening; start the motor,check the motor steering, steering how can motor, but must to ensure that the two motor turning in the opposite.
Shaker screen installation: if drilling fluid is circulating, open discharge valve on liquid inlet slot; flushing shale shaker screen when shale shaker operates; close the shale shaker; remove the straining box on both sides of the hammer type wedge to unload screen; remove the sieve tray,cleaning disk in the installation of new screen; replacement of worn out or lost the sealing strip and the support bar (make sure all screen sealing strips are in the correct position, to start the screen); carefully placed pre sieve tray new, do not allow the sieve plate bending phenomenon; check whether the screen level in the sieve box, and the installation is to use a hammer or a crowbar to slip; wedge locking, ensure that the wedge fastening and reliable.
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee
OGEM Solids Control is thet professional manufacturer of Solids Control System in China, OGEM is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solid control system and oil drilling solids control equipment,you can contact us online.
没有评论:
发表评论