Diamond drilling is becoming more and more popular now as following the diamond stone get cheapper and cheapper .
Diamond Drilling Introduction
Diamond core drilling uses a diamond bit, which rotates at the end of drill rod (or pipe). The opening at the end of the diamond bit allows a solid column of rock to move up into the drill pipe and be recovered at the surface. Standard core sizes are 7/8 inch (EX), 1 3/16 inch (AX), 1 5/8 inch (BX) and 2 1/8 inch (NX). Most drill rods are 10 feet long. After the first 10 feet is drilled, a new section of pipe is screwed into the top end, so the combination of pipes can be driven another 10 feet into the ground. The diamond bit is rotated slowly with gentle pressure while being lubricated with water to prevent overheating. The drill depth is estimated by keeping count of the number of drill rods.
Mud Cleaning system for diamond drilling
For diamond drilling , its required treating capacity is allways small . One diamond drilling company ordered us a 500liters/minute mud cleaning system without tank for diamond drilling mud cleaing . One GNTJ60 mud cleaner with desander and desilter cyclone and 15kw feeding pumps for desander & desilter . This mud cleaner and feeding pumps is one the first parts we calling processing part . One model SLH100 jet mud mixer with 15kw pump and a mud agitator JBQ5.5 on the mixing part .
OGEM Solids Control for mud cleaning system
OGEM Solids Control is a proffessional manufacturer for cleaning mud system including oil drilling , HDD drilling , diamond drilling , Coal & Gas drilling ,tunnel shield……
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee
没有评论:
发表评论