Operation of shearing pump for oil & gas drilling

OGEM Solids Control has shearing pump for sale now, shearing pump can not be used on active mud system since it will shear drill solids and barite, these solids will also damage pump very quickly. only after processed by desilter or decanter centrifuge, shearing pump can be used for these mud, together with jet mud mixing unit.
Operation of shearing pump
oilfield shearing pump

oilfield shearing pump

1 Pump rotates freely by hand.

2 Check pump rotation and the correct rotation can be found by arrow on the casing.

3 Suction valve fully open.

4 Pump and suction line full of fluid for venting air.
Lubrication of shearing pump

1 Bearings lubrication:

Add a good grade of 10W30 weight motor oil until the middle level of dipstick. Don not overfill the oil. High levels may cause churning and overheating of the bearings. Oil should be changed every 90 days or 1000 hours.

2 Stuffing box lubrication

The stuffing box may be re-lubricated with grease as often as necessary to prevent the packing from overheating. It should be lubricated at least once a day.
Maintenance

All parts should be clean before assembly. This is especially important for O-ring grooves, threads, gasket surfaces, bearings and bearings surfaces. Any burrs should be removed with crocus cloth.

Firstly slip the bearings onto the shaft. The two bearings are to be mounted back-to-back(that is, sides of the bearings with the manufacturer’s name and the bearing number are placed together), with lock washer in place tighten locknut with the bevel positioned against the bearings tighten the locknut to 346m/1N of torque. Then, put the with bearings into the frame from left and slip the bearing onto the shaft from right of frame.

For trouble shootings of oilfield shearing pump, pls contact OGEM Solids Control .
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
                                                   
Need any latest news about the Hydrocyclone desander or other oilfield equipment,please enter in our website. WELCOME!!!