OGEM Solids Control solids control equipment drilling fluid circulating system: 四月 2014

2014年4月30日星期三

OGEM Mobile Solids Control System’s Advantage

OGEM has integrated structural characteristics and designing ideas of both the mobile drilling solids control system to adapt to the operation time limits, to improve the speed of mobilization and to reduce the cost, and has innovated the mobile drilling solids control system.
Mobile Solids Control System Advantage
The advantages of mobile solids control system are as follows: it is safe, efficient and environmentally friendly. It has greatly improved the automation of the solids control system. It has been proved that this system not only has a simple structure, reliable safety and compact design, but also has the unparalleled edge of a convenient mobility and wide application.

drilling spot

Solids Control System Composition
Drilling fluid solids control equipment performance and quality is the key to the Solids Control System technology. Solids control system mainly consists of drilling fluid circulating tank, drilling fluid purification equipment and electrical control equipment of three parts, of which the drilling fluid purification equipment mainly shale shaker desander desilter decanter centrifuge centrifuge centrifugal pump mud cleaner vacuum degasser, etc., for environmentally sensitive areas, you can also configure the cuttings recovery and waste treatment plant.
The solid control equipment has been to fucus on the development of Desander, Desilter and Degasser and other devices with small footprint, high effectiveness and long service life. Combined with high speed centrifugal, OGEM soild control equipment can detect automatically and conduct control according to the detection results.
OGEM,the leader of China solids control system industry and expert in drilling waste management,is capable of providing customers with such four series as oil & gas drilling solids control equipment, centrifuges (decanter centrifuge as major), drilling waste treatment equipment and drilling security equipment, including 25 categories of products, and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. OGEM featured solids control equipment includes shale shaker desander desilter,mud cleaner,and decanter centrifuge.The products provided by OGEM are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment,industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:

OGEM Solids Control)

Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei

province,China

Tel: 86-315-8676484

Fax: 86-315-2648099

Zip Code: 063000

Email: ogem2@ogemsolidscontrol.com

Info@OGEMSolidsControl.com

Website: http://www.ogemsolidscontrol.com/

Skype:burning_lee

Facetime:bigshowlhc@163.com

OGEM solids control is main professional manufacturer of solids control system in China, OGEM is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment shale shaker,you can contact us online.

http://www.hbequipments.com/sell-shale_shaker-829035.html

http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html

http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html

http://www.hbequipments.com/sell-decanter_centrifuge-830036.html

How to make a effective solids control system ?

Effective drilling mud solids control can be attributed to the overall performance of all the components of the mud systems. Conditioning the drilling fluid with the goal of dramatically lowering maintenance cost, avoiding excessive chemical treatment and maintaining mud systems volume will decrease the chance of equipment failure, unnecessary high mud costs, hole and drilling problems.
In the early oil industry open earthen pits were used as settling area to separate solids and mud thereby acting as a solids control equipment. Now, with the stringent environmental regulations and high mud costs, the economics of an effective mud system come into consideration. Different solids control companies introduce zero-discharge systems, closed-loop systems,”quick move” technology, screening technology, disposal options etc.
A, the recommended installation order of unweighing mud solids control system is: shale shaker desander desilter decanter centrifuge centrifuge centrifugal pump mud cleaner vacuum degasser Hydrocyclone cone mud agitator flare igniter submersible slurry pump mud tank mud gas separator Jet Mud Mixer mud mixing pump mud gun screw pump Shale Shaker Screen shearing pump Vertical Cutting Dryer, by which the undesirable solids will be removed in descending sequence. The selection of solids control equipment for different levels should depends on mud density, solids type and content, rheological property and rated capacity of each solids control equipment. Other than decanter centrifuge, the capacity of all other the solids control equipment should not be less than 1.25 times of maximum capacity of centrifugal pumps.

oil drilling mud solids control equipment on mud tank

B, closed solids control system: the closed solids control system is an integrated unit where all the solids control equipment related are installed at the tanks to conduct a closed recycle treatment of drilling mud . The closed solids control system consists of two shale shakers with fine mesh, one desander and one normal shale shaker; decanting centrifuges installed downstream from two mud cleaners; one high-speed and a set of mun tanks with intercommunicating pore from each other that including three main tanks ,two storage tanks and one spare tank. This solids control system is characteristic by following advantages: large capacity for all kinds of unweighing mud, capable of maintaining the property of drilling mud, effective in solids-removal, needless to supplement water for mud especially applicable to water-stressed regions or offshore drilling, zero-emission of drilling mud avoiding environment pollution.
C, decanter centrifuge can be replaced by micro-hydrocyclones or added a micro-hydrocyclone before it to obtain more efficient operation and avoid massive loss of mud simultaneously.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Info@OGEMSolidsControl.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee
Facetime:bigshowlhc@163.com

http://www.hbequipments.com/sell-shale_shaker-829035.html
http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html
http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html

http://www.hbequipments.com/sell-decanter_centrifuge-830036.html

2014年4月29日星期二

The working principle of the oilfield drilling mud system

Drilling mud solids control equipment (solids control for short) are drilling equipment to control or separate the undesirable and even harmful solids mixed in drilling fluids. The separation of harmful solids from drilling fluids will contributes to better mud property and meet the increased demand on drilling efficiency by the scientific application and arrangement of solids control equipment.To form resonable and effective workflow of solids contrtol equipment is the key to achieve solidsc control goal.
The new type drilling fluids solids control system adopts five stage of solids control,following is the proper workflow of solids control technology.
The first solids control equipment mainly remove the large particles.The drilling fluids,pumped out of drilling hole containing large cuttings,will flow into oilfield shale shaker through connecting pipes.Theremoval of particles with diameter above 74 microns in shale shaker marks the achievement of first stage of solids control.
The second stage of solids control equipment is vacuum degasser used to remove harmful gas gathered in drilling fluids during normal operation.The vacuum degasser is the dedicated degasser equipment specialized in immediate and effective removal of undesirable gas which will change mud density and exert security hazard such as blowout and well fall.
The treated solids particles will be flow into the third solids control equipment where the sand with diameter from 44 to 74 microns will be removed. Desander plays its parts in this stage.
The fouth solids control equipment is desilter.In this case,the solids particles with diameter ranging from 15 to 44 microns are to be separated from the rest and will go through further processing in decanter centrifuge.It is worth of being noticed that the desander and desilter can be combined together to form a more effective solids control equipment named mud cleaner.
The fifth or the final solids control equipment is decanter centrifuge.After treated by the metioned solids control equipment,the drilling fluids contains fine solids( whith diameter from 2 to 15 microns)which have been failed removed will be treated by drilling decanter centrifuge.With a high centrifugal force and high end technology,Decanter centrifuge is highly effective in the separation of fine particlels.
The metioned five solids control equipment is mainly used in complex and demanding drilling condition, however,the drillers can select one or part of the metioned equipment depending the practic drilling operation.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Info@OGEMSolidsControl.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee
Facetime:bigshowlhc@163.com

How to keep a drilling shale shaker work efficiently ?

The oilfield drilling mud shale shaker is the first stage of oil drilling fluids solids control equipment in drilling fluids purification system.The oil drilling fluids shale shaker can remove cuttings above 75μm brought from the drilling well to leave the liquid with smaller particles into the drilling fluid circulation mud tanks below, which will flow into next grade drilling fluids solids control equipment to be treated.
The Economy of Drilling Mud Linear Motion Shale Shaker
OGEM drilling fluid linear motion shale shaker is especially effective while drilling top-hole sections where heavy and high-volume solids are usually encountered. In these intervals, drilling shale shakers may generate powerful G-forces and its effective vibrating motion can quickly remove the dense solids from screens and particles from wells.

shale shaker

How to keep oilfield shale shaker work efficiently ?
1. The excess pressure significantly decreases the drilling rate and removes cuttings from beneath the drill bit. Eight general rules to assure shale shakers will work properly and remove cuttings.
2. The shale shaker should be run continuously while circulating. Cuttings cannot be separated if the shaker bed is not in motion.
Fluid should cover most of the screen. If only one quarter or 1/3 of the screen is covered, the screen is too coarse and should be replaced with a finer screen.
3. If fluid flows through a hole or tear, cuttings are not removed. Any screen with a hole or tear should be replaced immediately. With a panel screen, the hole or tear can be plugged.
4. Shaker screen replacements should be made as quickly as possible. Minimize downtime by planning your work. Locate and arrange tools and screens before starting. If possible, get help. This will decrease the amount of cuttings being kept in the mud because the shaker is not running. If possible, change screens during a connection. In critical situations, drilling may be interrupted and the pumps stopped while the screen is replaced.
5. Dilution fluids ( water or oil ) should not be added in the possum belly or on the shaker screen.
6. Dilution fluids should be added downstream. Dilution-fluids ( even water ) additions should be metered or otherwise measured.
7. Except for cases of lost circulation ( when it is necessary to retain lost circulation material ), the shaker should not be bypassed, not even for a short time.
OGEM is a professional oilfield drilling mud shale shaker supplier and manufacturer in China oil drilling mud solids control industry.As the pioneer in this industry,OGEM is capable of providing customers with series products ,such as oil & gas drilling fluid solids control equipment, decanter centrifuge, drilling waste management equipment and drilling security equipment.
The products we can provide for oilfield and drilling fluid processing system including drilling fluid shale shaker desander desilter decanter centrifuge centrifuge centrifugal pump mud cleaner vacuum degasser Hydrocyclone cone mud agitator flare igniter submersible slurry pump mud tank mud gas separator Jet Mud Mixer mud mixing pump mud gun and all the other solids control equipment,complete solids control system,etc.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:

OGEM Solids Control)

Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei

province,China

Tel: 86-315-8676484

Fax: 86-315-2648099

Zip Code: 063000

Email: ogem2@ogemsolidscontrol.com

Info@OGEMSolidsControl.com

Website: http://www.ogemsolidscontrol.com/

Skype:burning_lee

Facetime:bigshowlhc@163.com

http://www.hbequipments.com/sell-shale_shaker-829035.html

http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html

http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html

http://www.hbequipments.com/sell-decanter_centrifuge-830036.html

Effective oil drilling fluids solids control system

At present, how to improve drilling efficiency has been a hot topic in the process of oil & gas drilling fields. OGEM engineers analyze some misunderstandings existing in solids control equipment based on the current situation of solids control system and the development of solids control equipment and propose improving measures for proper selection and use of drilling fluids solids control system and equipment involved with the purpose to improve drilling efficiency by reducing material consumption in different levels.
Statistics show that 90% of daily maintenance costs of drilling mud have been spent on solids control or related issues. The weighing cost occupies more than 75% of total drilling mud costs, due to this reason, the proper selection of usage of solids control system and related equipment will boost drilling efficiency by removing large volume of undesirable solids mixed in drilling fluids, by which the consumption of mud and related material will be dramatically reduced and high benefits will be achieved

oil drilling mud solids control system

1, to select the shale shakers with high performance and reasonable structure, and determine the quantity and size of shale shakers according to mud property.
2, to choose proper desander desilter with good performance and reasonable parameter, connect them in series for best separation efficiency.
3, connect intermediate and high speed decanter centrifuge in series for longer service life of further equipment and material saving.
4, based on the minimal volume of mud that used to fill up the drilling well, add 50% of which to serviced as active mud of solids control system for drilling safety, while the whole mud of solids control system should double the active mud.
OGEM is a leader in China solids control industry and expert in drilling waste management. OGEM is capable of providing customers with such four series as oil & gas drilling solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including 25 categories of products, including shale shaker,decanter centrifuge,drilling fluids degasser,and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. The products provided by OGEM are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment, industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:

OGEM Solids Control)

Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei

province,China

Tel: 86-315-8676484

Fax: 86-315-2648099

Zip Code: 063000

Email: ogem2@ogemsolidscontrol.com

Info@OGEMSolidsControl.com

Website: http://www.ogemsolidscontrol.com/

Skype:burning_lee

Facetime:bigshowlhc@163.com

http://www.hbequipments.com/sell-shale_shaker-829035.html

http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html

http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html

http://www.hbequipments.com/sell-decanter_centrifuge-830036.html

订阅：博文 (Atom)