How to make a effective solids control system ?

Effective drilling mud solids control can be attributed to the overall performance of all the components of the mud systems. Conditioning the drilling fluid with the goal of dramatically lowering maintenance cost, avoiding excessive chemical treatment and maintaining mud systems volume will decrease the chance of equipment failure, unnecessary high mud costs, hole and drilling problems.
In the early oil industry open earthen pits were used as settling area to separate solids and mud thereby acting as a solids control equipment. Now, with the stringent environmental regulations and high mud costs, the economics of an effective mud system come into consideration. Different solids control companies introduce zero-discharge systems, closed-loop systems,”quick move” technology, screening technology, disposal options etc.
A, the recommended installation order of unweighing mud solids control system is: shale shaker    desander  desilter  decanter centrifuge  centrifuge centrifugal pump   mud cleaner   vacuum degasser   Hydrocyclone cone    mud agitator    flare igniter     submersible slurry pump  mud tank    mud gas separator   Jet Mud Mixer    mud mixing pump   mud gun  screw pump    Shale Shaker Screen    shearing pump   Vertical Cutting Dryer, by which the undesirable solids will be removed in descending sequence. The selection of solids control equipment for different levels should depends on mud density, solids type and content, rheological property and rated capacity of each solids control equipment. Other than decanter centrifuge, the capacity of all other the solids control equipment should not be less than 1.25 times of maximum capacity of centrifugal pumps.

oil drilling mud solids control equipment on mud tank

B, closed solids control system: the closed solids control system is an integrated unit where all the solids control equipment related are installed at the tanks to conduct a closed recycle treatment of drilling mud . The closed solids control system consists of two shale shakers with fine mesh, one desander and one normal shale shaker; decanting centrifuges installed downstream from two mud cleaners; one high-speed and a set of mun tanks with intercommunicating pore from each other that including three main tanks ,two storage tanks and one spare tank. This solids control system is characteristic by following advantages: large capacity for all kinds of unweighing mud, capable of maintaining the property of drilling mud, effective in solids-removal, needless to supplement water for mud especially applicable to water-stressed regions or offshore drilling, zero-emission of drilling mud avoiding environment pollution.
C, decanter centrifuge can be replaced by micro-hydrocyclones or added a micro-hydrocyclone before it to obtain more efficient operation and avoid massive loss of mud simultaneously.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: 
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei 
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
       Info@OGEMSolidsControl.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee   
Facetime:bigshowlhc@163.com                             

OGEM solids control is main professional manufacturer of solids control system in China, OGEM  is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment  shale shaker,you can contact us online.

http://www.hbequipments.com/sell-shale_shaker-829035.html
http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html
http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html

http://www.hbequipments.com/sell-decanter_centrifuge-830036.html