Points for attention during installing and operating shale shaker

Shale shaker is a component of drilling solids control system used in many industries, such as coal cleaning, mining, oil and gas drilling. Shaker is considered the first phase of solids control equipment in drilling mud solids control, they are used to remove large solids also called cuttings from the drilling fluid, more commonly called “Mud” due to its similar appearance.

Shale shaker

When we use the shale shaker,we should notice:

1.The screen can be used alone or have two or more combined in which slurry influx pipe manifolds can be made according to the users’ requirements.

2.The installation and replace of the screen cloth: Screen cloth is an expensive wearing part for this equipment, the quality of its installation will directly influence its service life. A bolt stretching device is adopted to fix the screen cloth.

3.The regulating of the screen box’s dip angle: When slurry discharging quantity is too much or escaping because of a higher viscosity, the screen box’s dip angle should be regulated. The best dip angle is that one preventing slurring from escaping. The screen box’s dip angle of the facility can be discretionarily regulated by the values including -1°, 0°, 1°, 2°, 3°, 4°, 5°. When adjusting, the oil return valve of the hand pump should be screwed down firstly and tightly. At the same time, lightly press the manual rocker until the lifting slide bushing will be going up a little. By this step, have the pin drawn off with pressurizing finished manually. The movement of the hydraulic cylinder will change screen box’s dip angle. When the regulation finishes, the facility will not resume its work until the bolt pin is inserted with oil return valve unscrewed. While the screen is in its operation, the slurry should cover 3/4 of the screen cloth. If the covered area is not up to the standard, it shows that the screen mesh is too thick. And to improve its purifying result the screen with thin mesh must be replaced.

4.Fixing screen box during transportation: In order to prevent any damage during transportation, please remember: the locking yoke should be tightly locked in transportation, making sure that there is no relative movement between screen box and pedestal. The locking yoke should be unlocked before its starting, otherwise, the machine will be seriously damaged!

OGEM is capable of providing customers with series oil & gas ,centrifuge and drilling waste treatment equipment, including 25 categories of products, which are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, industrial wastewater treatment, environmentally friendly sewage treatment, waste oil recovery and purification treatment, etc.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: 

OGEM Solids Control)

Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei 

province,China

Tel: 86-315-8676484

Fax: 86-315-2648099

Zip Code: 063000

Email: ogem2@ogemsolidscontrol.com

Website: http://www.ogemsolidscontrol.com/

Skype:burning_lee                                

OGEM solids control is main professional manufacturer of solids control system in China, OGEM  is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment  shale shaker,you can contact us online.

http://shiyoujixie.en.ec21.com/

http://www.made-in-china.com/showroom/china-solids-control