The tips on operating decanter centrifuge well for drilling solids control

In the oilfield drilling, decanter centrifuge is used frequently and is necessary to effectively separate solids particles in the drilling fluids. Decanter centrifuge is also called horizontal screw discharge sedimentation centrifuge, is the special solids control equipment of solid-liquid separation, designed by the characteristic of drilling fluid. It can accomplish each procedure of feed, centrifugal sedimentation, unloading, etc.

decanter centrifuge

Here let’s share the tips on operating decanter centrifuge well for drilling solids control.

1. Centrifuges to be installed on top of the new entrance to the tank away from the drilling pump, can also be arranged according to the actual situation.

2. Frequently check the fasteners are tightened, and lubrication of lubricating parts.

3. The top-long centrifuge should be cleaned rollers and conveyor to have a confirmation no jamming before boot.

4. Machine operation should idling for 10-15 minutes, confirm centrifuge normal operation, then open the pump for a small to large amount of slurry, adjusted to a suitable date.

5. If the drilling fluid viscosity is too high, should be appropriately adding dilution water, to reduce viscosity, to accelerate the solid phase precipitation speed, improve the processing capability of the centrifuge.

6. All safety protection guards shall be installed before starting up. It is forbidden to open the guards of decanter centrifuge to observe the running state of the machines.

7. During the operation of the decanter centrifuge, don’ t touch the moving parts and rotation parts.

8. It is forbidden to brake in any way before the decanter centrifuge is stopped.

9. If there is abnormal noise and vibration, close down decanter centrifuge immediately and make troubleshooting.

10. It is forbidden to have the decanter centrifuge running at the rotating speed out of active speed that indicated in the instruction and nameplate.

In the industry of China solids control, OGEM is one of top 3 China solids control companies. OGEM machinery exclusively handles oil & gas drilling fluids solids control equipment and solids control system, as well as varieties of chemical agent, such as shale shaker    desander  desilter  decanter centrifuge  centrifuge centrifugal pump   mud cleaner   vacuum degasser   Hydrocyclone cone    mud agitator    flare igniter     submersible slurry pump  mud tank    mud gas separator  Jet Mud Mixer    mud mixing pump   mud gun  screw pump    Shale Shaker Screen    shearing pump   Vertical Cutting Dryer,etc.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: 

OGEM Solids Control)

Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei 

province,China

Tel: 86-315-8676484

Fax: 86-315-2648099

Zip Code: 063000

Email: ogem2@ogemsolidscontrol.com

       Info@OGEMSolidsControl.com

Website: http://www.ogemsolidscontrol.com/

Skype:burning_lee                                

OGEM solids control is main professional manufacturer of solids control system in China, OGEM  is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment  shale shaker,you can contact us online.

http://shiyoujixie.en.ec21.com/

http://www.made-in-china.com/showroom/china-solids-control