General recommendations for the installation of desander

The Application of desander:

OGEM desander is the second stage solids control equipment which processes particles above 45μm in the drilling fluid, facilitating better treatment effect of the next stage equipment desilter and decreasing its workload.

While installing a desander, please follow these general recommendations:

1. Size the desander to process 100-125% of the total mud circulation rate.

2. Keep all lines as short & straight as possible with a minimum of pipe fittings. This will reduce loss of pressure head on the feed line & minimize back-pressure on the overflow discharge line.

3. Do not reduce the diameter of the overflow line from that of the overflow discharge manifold.

4. Direct the overflow line downward into the next downstream compartment at an angle of approximately 45%. The overflow discharge line should never be installed in a vertical position, doing so may cause excessive vacuum on the discharge header and pull solids through the cyclone overflow, reducing the cyclones efficiency.

5. Keep the end of the discharge line above the surface of the mud to avoid creating a vacuum in the line.

6. Install a low equalizer line to permit backflow in to the desander section.

OGEM is a leader in China solids control industry and expert in drilling waste management. OGEM is capable of providing customers with such four series as oil & gas drilling solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including 25 categories of products, and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors. The products provided by OGEM are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, municipal environment-friendly sewage treatment, industrial wastewater treatment, fruit juice purification, waste oil recovery and purification treatment, etc.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for:
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee                              

OGEM solids control is main professional manufacturer of solids control system in China, OGEM  is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment  shale shaker,you can contact us online.

http://shiyoujixie.en.ec21.com/
http://www.made-in-china.com/showroom/china-solids-control