Introduction of Drilling Mud Decanter Centrifuge
Drilling fluid decanter centrifuge used for recovery barite to remove small solid particles, reduce the mud solid content, to ensure the performance of the drilling fluid. And OGEM supply drilling fluid centrifuge has high purification efficiency, convenient adjustment and easy maintenance .
The Operation Principle of Drilling Mud Decanter Centrifuge
The drilling fluid decanting centrifuge is driven by two motors. The main motor drives the drum and differential shell rotation by the belt . The vice motor drives the spiral through the differential variable speed . The drum and spiral rotate together in the same direction, but at different speeds . Separate the solid phases in the drilling mud by the centrifugal sedimentation principle. Suspending fluids is pushed into the rotor drum through the inlet pipe and under the force of screw propeller, under the effect of centrifugal force, the solid phases will be pushed onto the inside wall of the drum, pass the impeller on the screw propeller and be discharged from the exhaust hole at the small side of the drum. The fluids is excreted from the overflow hole of the large end. So continuous circle like above to achieve the target of continuous solid-liquid separation .
OGEM LXJ Series decanter centrifuge adopts centrifugal force to separate solid particles out of drilling fluid.Different solid or particle have different density and flow speed,some decanter centrifuge also can separate particles as different size and density.OGEM LXJ decanter centrifuge is widely used in oil and gas drilling,chemical,foodstuff,pharmacy,mineral beneficiation,water treatment,etc.
If you want to know more infos,can contact us.We will try my best to serve you.
CONTACT WITH US
没有评论:
发表评论