What is the Hydrocyclone Desander?
Hydrocyclone Desander is 2nd solids control equipment.It mainly use 8” 10” 12” desander cones.Desander is to separate particle sized 47~76 mircons. The treating capacity and cones configuration depend on client’s demand.
Desander is the combination of hydrocyclone and shale shaker. The main body can be separated into two parts, the above part is the hydrocyclone and the bottom is the circular shale shaker. The vibration exciter is driven by a vibration motor to keep the whole screen box vibrate with a forward circular track.
The principle of Hydrocyclone Desander
The mud produces pressure and speed when it passes the centrifugal pump, and flows into the hydrocyclone along the wall, the bigger solid particles along the wall of hydrocyclone sink spirally under the centrifugal force and gravity, and to be discharged from the bottom flow hole and fall on the under micromeshsieve for separation. The other mediums rise along the spiral of hydrocyclone, flow into the third class separation equipment-desilter for a further cleaning treatment from the overflow hole. The above procedure guarantees the mud can be well handled in the next equipments and decrease the workload.
OGEM Series Desander is widely used in oil and gas drilling,HDD,slurry separation,etc.
CSQ Series Hydrocyclone desander parameters
????Modle
| CSQ200 | CSQ250 | CSQ300 |
| Treating capacity | ?120m3/h ?528GPM | ?180m3/h ?792GPM | ?240m3/h ?1056GPM |
| Desander cones size | 8″ | 10″ | 12″ |
| Working pressure | ?? 0.15~0.35Mpa | ||
| Feed inlet | 125mm | 150mm | 150mm |
| Discharge output | 150mm | 200mm | 200mm |
| Separation size | 47-76?m | 47-76?m | 47-76?m |
| Bottom shaker screen | 1.0m2(600?1600mm) | ||
If you are interested in our equipment,can contact us freely.We will provide you the best service.
CONTACT WITH US
没有评论:
发表评论