A mud tank is an open-top container, typically made of square steel tube & steel plate, to store drilling fluid on a drilling rig. They are also called mud pits, because they used to be nothing more than pits dug out of the earth.
THE APPLICATION OF MUD TANK
Widely used in oil and gas drilling, HDD, CSM exploration, slurry separation, etc. They are high anti-corrosive, anti-rust, long usable life.
THE STRUCTURE OF MUD TTANK
Mud tanks are divided into square square tanks and cone-shaped tanks according to the shape difference of the tank bottom.
The body of the tank is made by welding the steel plate and section, using the smooth cone-shape structure or the corrugated structure. The mud tank surface and passages are made of slip resistant steel plate and [[expanded steel]] plate. The mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably. The surface of the tank is equipped with a water [[Pipeline transport|pipeline]] for cleaning the surface and equipment on the tank, it uses soaked zinc processing for the expanded steel plate. The ladder is made of channel steel to take responsibility the body, the foot board is made of expanded steel plate. The two-sided guard rail are installed the safe suspension hook. The mud tank is designed the standard shanty to prevent the sand and the rain. The pipeline is installed in the tank to preserve the warm air heat.
A tank is sectioned off into different compartments. A compartment may include a settling tank, sometimes called a sand trap, to allow sand and other solids in the drilling fluid to precipitate before it flows into the next compartment. Other compartments may have [[agitators]] on the top, which have long impellers below inserting into the tank & stirring the fluids to prevent its contents from precipitating. And mud guns are often equipped at the corners of the tanks' top, spraying high-pressed mud to prevent the drilling fluids in the corner of the compartment from precipitating, typically for the square tanks.
The tanks are generally open-top and have walkways on top to allow a worker to traverse and inspect the level of fluids in the tanks. The walkways also allow access to other equipments that are mounted on the top. Recently, offshore drilling rigs have closed-in tanks for safety. The mud tank plays a critical role in mechanically removing destructive solids and sediment from costly land and offshore drilling systems.
The pipe work linking the mud tanks/pits with the mud pumps is called the suction line. This may be gravity fed or charged by centrifugal pumps to provide additional volumetric efficiency to the mud pumps.
MUD TANK----HOW TO WORK
Drilling fluids flow into the shale shaker directly after it returns to the surface of the well, and the solids that are removed by the screen would be dischanged out of the tank, and the drilling fluids with smaller solids would flow through the screen into mud tank for further purification. A [[centrifugal pump]] would sucks the shaker-treated fluids up to the desilter or mud cleaner for further purification. And vertical slurry pump is used to pump the drilling fluids up to the centrifuge,and mud pump would pump the drilling fluids from mud tank into the borehole after it is treated by centrifuge. And the circulation system would continues.
The number of the mud tanks that are needed on the drilling rig depends on the depth of the well, and also the mud demands of drilling. Nomally the shale shaker and vecuum degasser and desander are mounted together on the same mud tank as the first tank at the oilfield, while desilter and centrifuge on the second tank. and also the drilling rig would has other different tank as reserve tank,emergency tank, etc.
THE OTHER NECESSARY DRILLING MUD EQUIPMENT TOGETHER WITH MUD TANK.
It is the base of solids control equipments, and also the carrier of drilling fluids. Solids control equipments that are all mounted on the top of mud tanks include the followings:
Shale shaker
Degasser|vacuum degasser
Desander
Desilter
Centrifuge
Mud agitator
Slurry pump|Vertical slurry pump
NEED MUD TANK OR OTHER DRILLING MUD EQUIPMEN----CONTACT OGEM EQUIPMENT
OGEM EQUIPMENT------WHAT CAN WE DO FOR OUR CUSTOMERS
In OGEM equipment you can get ideal design on mud tanks. We'll consider complete mud tanks system configuration. Such as proper space and position for shale shaker, mud cleaner, centrifuge decanter, mud mixing hopper, centrifugal pumps, etc. So we have shaker tank, suction tank, mixing tank terms.
THE GENERAL INTRODUCTION OF OGEM AJT SERIES MUD TANK
OGEM Equipment is a professional mud tank manufacturer. Mud tankS of OGEM are high anti-corrosive, anti-rust, long usable life.
1. Accprding to tank base shape, there are square and cylinder tank. 2. Tanks main body are welded together with steel plate and steel section. 3. Tank top and walk way is made of steel grid and antiskid plate. 4. Guard rail material is square pipe, rails are flodable type. 5. Stairs are made of antiskid plate. 6. Two sides rail have pins for steady and safe walk.
THE TECHNICAL PARAMETER OF OGEM AJT SERIES MUD TANK
Model AJT
Dimension Customizable
Type Square/Cyclinder
Raw material Excellent national standard steel
Compartment Customizable
Main application Contain drilling fluid, as platform for mud process
THE FEATURE OF OGEM AJT SERIES MUD TANK
1.Type and size is customizable 2. Excellent quality raw material 3.Sufficient accessories 4.High effective capacity
THE BENEFITS OF OGEM AJT SERIES MUD TANK
1.User friendly and high adaptable ability 2.Wonderful performance with lower cost 3.Make mud tanks mature and good connections 4.Store more drilling fluid
ABOUT PRODUCTS OF OGEM EQUIPMENT
Main products
Shale shaker, mud cleaner, decanter centrifuge, centrifugal pump, mud agitator, mud mixing pump, shearing pump, degassers, flare ignitor, mud tanks,whole drilling mud process system, etc.
Main applications
Onshore/offshore o&g drilling, HDD, CSM Drilling, various well drilling,
Separation for mining exploration, etc.
How to Ensure High Quality ?
1. Vibration motor is from top MFG: Ital-Vibras
2. Standard steel is from Chinese top manufacturer: HBIS
3. Paint oil is from famous Kansai & COSCO Paint Co. Ltd
4. Eletrical materials from SIMENSE or Schneider
5. All motors and electric parts are explosion proof type
6. All outsourcing parts are from top manufacturers both domestic and overseas.
7. All painting: a. Sand Blast Treatment before painting.
b. Two pack Epoxy zinc-rich primer painting
c. Two Pack Epoxy hi-build containing anticorrosive pigments.
d. Surface pigmented with high quality light fast PU pigments
NEED MUD TANK OR OTHER EQUIPMENTS---CONTACT US
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
WELCOME!!!
没有评论:
发表评论