YZ Submersible slurry pump
is with structure of vertical single stage and single suction system
overhung centrifugal pump,it is made of abrasion-resistant alloy,it
canconvey medium with high concentration particle.
There is no bearing and Gland Seal between impeller and
pump body,so the slurry pump is maintenance-free and high temperature
resistance,the slurry pump is the ideal centrifugal pump for
- Feeding Shale Shaker from Mud Pit for HDD Mud Recycling
- Feeding Desander Desilter
- Feeding Decanting Centrifuge
- Mining Slurry Separation System
Submersible Slurry Pump
YZ Submersible slurry pump Technical parameters:
|
Model
|
Flow
|
Lift
|
Speed
|
Efficiency
|
Match motor
|
|
m3/h
|
(m)
|
(r/min)
|
(%)
|
(KW)
|
|
|
50YZ25-12
|
25
|
12
|
1430
|
39.5
|
3
|
|
50YZ50-20
|
50
|
20
|
1440
|
46
|
7.5
|
|
50YZ36-50
|
36
|
50
|
1470
|
34
|
22
|
|
50YZ36-50A
|
33
|
42
|
1470
|
33
|
18.5
|
|
65YZ50-12
|
50
|
12
|
1440
|
55.9
|
5.5
|
|
65YZ50-12A
|
48
|
10.8
|
1440
|
55.4
|
5.5
|
|
80YZ80-20B
|
68
|
15
|
1460
|
53
|
7.5
|
|
80YZ80-20A
|
73
|
17.5
|
1460
|
53
|
11
|
|
100YZ100-30
|
100
|
31
|
1470
|
54
|
22
|
|
100YZ120-60A
|
120
|
50
|
1480
|
49
|
45
|
|
150YZ250-40
|
300
|
38
|
1480
|
52
|
55
|
YZ – Vertical Submersislbe slurry pump
80 – Pump outlet diameter (mm)
80–Pump design flow rate (m ³ / h)
20 –Pump design head (m)
A –Impeller first to be cut less
Pump’s drive type:
The slurry pump is connecting through the flexible
coupling and the electric motor, the pump direction of rotation is
clockwise from the prime move.
YZ Submersible slurry pump structure
YZ Slurry Pump is the cantilever pump structure of
single stage and single suction, with the bearing housing, supporting,
intermediate pipe connecting the pump hydraulic components, the water
is discharged out from the drain pipe parts, pump impeller is for
semi-shrouded with the agitating vane on the vane extended, the main
characteristic of this pump is the underwater pump shaft parts have
enough rigidity, the impeller and pump shell have no bearings, no shaft
seal, which can transport the greater medium of solid particles.
The length of inserting the water by slurry pump is
between 800 and 2000, the suction pipe can be matched in case of need.
The shaft seal runs into the underwater pump without setting up the
shaft seal, drive should be installed the vertical motor on the
supporting seat connecting with coupling and pump.
Mud tank submersible slurry pump.Your best submersible slurry pump for drilling mud circulation system.
没有评论:
发表评论