Drilling Fluid Cleaning Mud Cleaner with Derric Shaker Screen
China
History
Although US Patent No.3,766,997 covering Mud Cleaner was issued
on October 23, 1973 granted to J.K. Heilhecker and L.H. Robinson and assigned
to Exxon Production Research Company, it was found invalid and efforts for
re-issue was unsuccessful because of the existence of prior art filed at the British Patent
Office by a German Inventor in the late 1800s.[1]
Nowadays, mud cleaner used in oilfield means the equipment
processing drilling mud. It is combined with desander cone and desilter cone as
well as bottom shaker. It is called 2nd and 3rd phase solids control equipments
Description
A mud cleaner is a combination of desanders and/or desilters
mounted over a shaker with a fine mesh screen. A mud is fed to the inlet of the
hydrocyclone (desander
and/or desilter) to separate particles and the underflow passes to the fine
screen mesh where in particles larger than barite are discarded and
thrown away. In most drilling operations, a mud cleaner is installed in its mud systems. It is usually
located in a mud tank in the same location as with the desilters.
Process Flow
The weighted mud flows to the inlet head section of the desander
and/or desilter entering the hydrocyclones for separation of particles. Mud
leaving the underflow is further screened with fine mesh to separate larger
particles allowing only barite size particles to pass through the screen
returning and recovering then the clean mud.
Purpose
The purpose of the mud cleaner is to remove drilled solids
larger than barite. Solids larger than 74-105 micrometres can be removed by the
mud cleaner before the viscosity
MUD CLEANER, WHAT IS USED FOR?
Mud Cleaner is the second class and the third class solid
control equipment which is the newest type to treat the drilling fluid. The
purpose of the mud cleaner is to remove drilled solids larger than barite.
Solids larger than 74-105 micrometres can be removed by the mud cleaner before
the viscosity builds up.
THE STRUCTURE OF MUD CLEANER
Drilling mud cleaner is also called Desander and
Desilter assembly,which is the combination of desander,desilter and an
underflow screen.Namely,mud cleaners consists of a two-stage separation process
using a combination of hydrocyclones mounted over a shale shaker to operate as
a single unit. Designed to handle the entire circulating volume.
THE FLOW OF USING
MUD CLEANER
The weighted mud flows to the inlet head section of the desander and/or desilter entering the hydrocyclones for separation of particles. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite size particles to pass through the screen returning and recovering then the clean mud.
The weighted mud flows to the inlet head section of the desander and/or desilter entering the hydrocyclones for separation of particles. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite size particles to pass through the screen returning and recovering then the clean mud.
OGEM AJQ SERIOUS MUD CLEANER---------YOUR GOOD CHOICE
THE DESCRIPTION OF OGEM AJQ MUD CLEANER
1. Mud cleaner structure is compact, high
efficient equipment. It is a combination of 2nd and 3rd phase solids control
and it is your ideal choice for drilling mud process.
2. AJQ series drilling fluid mud cleaner
includs desander, desilter, pressure gauge, underflow discharge, shale shaker,
support and pedestal.
Features
1.Two
side screen tensioning-More reliable
2.Various
screen type-Flexible
3.High
G vibration motor-High efficiency
4.Linear
motion-Rapid discharges
5.Mechanical
deck angle adjustment-Easy and convenient
6.Polymeric
material cones-Durable
7.Customizable
configuration
Benefits
1.Compact
footprint and light
2.User-friendly
3.Easy
to installation
4.Low
cost on operation and maintenance.
5.Low
noise
6.Decrease
drilling cost
7.Controlling
well on drilling mud leakage
8.Flexibility
on treating capacity
|
Model
|
AJQ703
|
AJQ603
|
AJQ703B
|
AJQ603B
|
|
Treating
capacity
|
120~270m3/h
528~1180GPM |
120~240m3/h
528~1056GPM |
60~160m3/h
264~700GPM |
60~160m3/h
264~700GPM |
|
Desilter
cone
|
4"(8~20 EA)
|
4"(10~16 EA)
|
4"(4~12 EA)
|
4"(4~10 EA)
|
|
Desander
cone
|
10"(1~3 EA)
|
10"(1~2 EA)
|
8"(1~2 EA)
|
8"(1~2 EA)
|
|
Feed
inlet
|
150mm
|
150mm
|
150mm
|
150mm
|
|
Discharge
output
|
200mm
|
200mm
|
200mm
|
200mm
|
|
Feeding
pump motor
|
45~75KW
|
45~55KW
|
37~45KW
|
37~45KW
|
|
Bottom
shaker
|
AJS703
|
AJS603
|
AJS703
|
AJS603
|
|
Vibration
mode
|
Linear
motion
|
|||
|
Vibration
motor
|
2×1.5KW
|
2×1.5KW
|
2×1.5KW
|
2×1.5KW
|
|
Screen
area
|
2.2m2
|
2.05m2
|
2.2m2
|
2.05m2
|
|
Screen
panel
|
3panel
|
3panel
|
3panel
|
3panel
|
|
Remark
|
Hydrocyclone quantity decides treating capacity.
4” cone =15~20m3/h, 8” cone=60~90m3/h, 10” cone=90~120m3/h
|
|||
Technique parameters
|
Model
|
AJQ703
|
AJQ603
|
AJQ703B
|
AJQ603B
|
|
Treating capacity
|
120~270m3/h
528~1180GPM |
120~240m3/h
528~1056GPM |
60~160m3/h
264~700GPM |
60~160m3/h
264~700GPM |
|
Hydrocyclones
|
4" (8~20EA)
|
4" (10~16EA)
|
4"(4~12EA)
|
4"(4~10EA)
|
|
10"(1~3EA)
|
10"(1~2EA)
|
8"(1~2EA)
|
8"(1~2EA)
|
|
|
Feed inlet
|
150mm
|
150mm
|
150mm
|
150mm
|
|
Discharge output
|
200mm
|
200mm
|
200mm
|
200mm
|
|
Feeding pump power
|
45~75KW
|
45~55KW
|
37~45KW
|
37~45KW
|
|
Bottom shaker
|
AJS703L
|
AJS603L
|
AJS703L
|
AJS603L
|
|
Vibration mode
|
Linear motion
|
|||
|
Vibration motor
|
2×1.5KW
|
2×1.5KW
|
2×1.5KW
|
2×1.5KW
|
|
Screen area
|
2.2m2
|
2.05m2
|
2.2m2
|
2.05m2
|
|
Screen panel
|
3
|
3
|
3
|
3
|
AJQ Mud
cleaner configuration can be customized according to drilling mud capacity
requirements.
OGEM
Equipment is professional manufacturer on mud process equipment. Including
solids control mud cleaner, centrifugal feeding pump, etc. Contact us you'll
get reasonable price with high quality
Description:Mud cleaner is combined with Desander/Desilter hydrocyclone and
bottom shaker
MUD CLEANER, WHAT IS USED FOR?
Mud Cleaner is the second class and the
third class solid control equipment which is the newest type to treat the
drilling fluid. The purpose of the mud cleaner is to remove drilled solids
larger than barite. Solids larger than 74-105 micrometres can be removed by the
mud cleaner before the viscosity builds up.
THE STRUCTURE OF MUD CLEANER
Drilling mud cleaner is also called
Desander and Desilter assembly,which is the combination of desander,desilter
and an underflow screen.Namely,mud cleaners consists of a two-stage separation
process using a combination of hydrocyclones mounted over a shale shaker to
operate as a single unit. Designed to handle the entire circulating volume.
THE FLOW OF USING MUD CLEANER
The weighted mud flows to the inlet head
section of the desander and/or desilter entering the hydrocyclones for
separation of particles. Mud leaving the underflow is further screened with
fine mesh to separate larger particles allowing only barite size particles to
pass through the screen returning and recovering then the clean mud.
OGEM AJQ SERIOUS MUD CLEANER---------YOUR
GOOD CHOICE
THE DESCRIPTION OF OGEM AJQ MUD CLEANER
1.
Mud cleaner structure is compact, high efficient equipment. It is a combination
of 2nd and 3rd phase solids control and it is your ideal choice for drilling
mud process.
2.
AJQ series drilling fluid mud cleaner includs desander, desilter, pressure
gauge, underflow discharge, shale shaker, support and pedestal.
FEATURES
1.Two side screen tensioning-More reliable
2.Various screen type-Flexible
3.High G vibration motor-High efficiency
4.Linear motion-Rapid discharges
5.Mechanical deck angle adjustment-Easy and
convenient
6.Polymeric material cones-Durable
7.Customizable configuration
SERVICE &GURANTEE of OGEM EQUIPMENT
1. Before service: According to client
requirements, OGEM will provide optimal solutions at earliest time.
2. After service: All OGEM equipments will
have one year guarantee after commissioning date except wearing parts and illeagle operation.
3. Commissioning: As per user demand, OGEM
can arrange engineer do 1st commissioning for free. We can also provide
training courses to client staff.
4. Emergency solution: The time to client
job site depend on visa issuance. Anyhow, we will do our best to solve
emergency as soon as we can.
5. Sapre parts supply: OGEM have
considerable stock to stare various spare parts. This guarantees the spare
parts can be sent to the clients in time.
ABOUT PRODUCTS OF OGEM EQUIPMENT
OGEM
Equipment is short name for Tangshan Aojie Petroleum Machinery Equipment Make.
Co., Ltd. Our core business is manufacture mud process equipment and system.
Main products
Shale shaker, mud cleaner, decanter
centrifuge, centrifugal pump, mud agitator, mud mixing pump,
shearing pump, degassers, flare ignitor,
mud tanks,whole drilling mud process system, etc.
Complete spare parts, such as shaker
screen, hydrocyclone cone, hopper, motor, bare pump, valve,
rig matting, pipeliens, piperack etc.
As well as high pressure BOP hose,
rotary/drilling hoses, choke and kill hose, high pressure flexible hoses,
flanges, unions, etc.
Main applications
Onshore/offshore o&g drilling, HDD, CSM
Drilling, various well drilling,
Separation for mining exploration, etc.
Tunnelling, underground, pipeline,
shielding, piling, trenchless, other civil construction
Well control/completion industry
Why CHOOSE OGEM EQUIPMENT?
1.Professional for mud process
2.Experienced engineer on solids control
3.Customer-oriented principle
4.High quality
5.Competitive price
6.ISO Certified company
OGEM EQUIPMENT
Any requirements, please contact with us
freely!
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!
没有评论:
发表评论