Horizontal spiral sedimentation centrifuge
has become an impotant drilling fluid solids control equipment.Now high
separation factor,large capacity and high reliability are the
development trend of this type centrifuge.
Horizontal Spiral Sedimentation CentrifugeDrilling fluid decanter centrifuge
could remove out the unwanted particals with size of minimum 2 microns
from the drilling mud. The main motor and the assistant motor
respectively drive the drum and differential to rotating by belt pulley
on both of the large and small end. Inner the high-speed rotating drum
there is a conveyor with screw blade, and the drum supported by the
bearing house.
Drum is connected with the differential shell through the hollow shaft at the left bearing,the differential output shaft drive the screw conveyor and the drum to rotate homodromously, but the speed is different, the slip speed is 0.2% to 3% of drum rotation speed.
Drilling fluid is pumped into the drum through screw conveyor. Under the effect of the centrifugal force,a circle liquid pool was formed, the heavy solids phase particles settled to the inner surface of the drum. Due to the relative motion between the drum and spiral blade, solid sediment was pushed to the small end of the drum and discharged from the slag hole. While the clean drilling fluid discharge from the overflow hole set on the large end of the drum.
More info about our decanter centrifuge,pls contact us no hesitate.
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!
Drilling Solids Control
Drum is connected with the differential shell through the hollow shaft at the left bearing,the differential output shaft drive the screw conveyor and the drum to rotate homodromously, but the speed is different, the slip speed is 0.2% to 3% of drum rotation speed.
Drilling fluid is pumped into the drum through screw conveyor. Under the effect of the centrifugal force,a circle liquid pool was formed, the heavy solids phase particles settled to the inner surface of the drum. Due to the relative motion between the drum and spiral blade, solid sediment was pushed to the small end of the drum and discharged from the slag hole. While the clean drilling fluid discharge from the overflow hole set on the large end of the drum.
More info about our decanter centrifuge,pls contact us no hesitate.
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!
Drilling Solids Control
没有评论:
发表评论