WHAT IS THE HYDROCYCLONE DESANDER AND HOW IT WORK
Hydrocyclone desander is the second
phase of drilling fluids process. They are also centrifugal device but removing
sand or bigger particles from drilling fluid to prevent abrasion of the pumps. Desander are used to separate sand from drilling
fluids which is mixed with drilling muds and big articles. During drilling
process mud is being poured from inlet and is getting deeper. when the vortex
in the hydroclone running, the water spray from a pipe and the mud ,soil,big
articles subside down the outlet. That is the recycling of mud in order to
separate water from mud and get a clean water that will be used in next
excavations.
ABOUT OGEM CSQ SERIES HYDROCYCLONE DESANDER
THE GENERAL INTRODUCTION:
1.CSQ series Hydrocyclone desander is 2nd solids
control
equipment.
2. CSQ mainly uses 8", 10",12" desander
cones.
3. Desander is to seperate particle sized
47~76μm.
4. The treating capacity and cones configuration depend on client demand.
THE ADVANTAGES OF OGEM HYDROCYCLONE DESANDER:
1. Light weight,
compact.
2. ISO9001-2008 certificate .
3. OGEM hydrocyclone desander can be
customized for all the client., just contct
us freely.
4. Desander provide better effect for subsequnt
process.
5.Provide durable and low cost replacement.
6. More flexible,
user-frendly.
7.OGEM CSQ serious hydrocyclone desander save
much space and provide easy handling.
THE TECHNICAL PARAMETERS:
|
Model
|
CSQ200
|
CSQ250
|
CSQ300
|
|
Treating
capacity
|
≤120m3/h
≤528GPM |
≤180m3/h
≤792GPM |
≤240m3/h
≤1056GPM |
|
Desander
cones
|
8"
|
10"
|
12"
|
|
Cones
quantity
|
1~3EA
|
1~3EA
|
1~3EA
|
|
Working
pressure
|
0.15~0.35Mpa
|
||
|
Feed inlet
|
125mm
|
150mm
|
150mm
|
|
Discharge
output
|
150mm
|
200mm
|
200mm
|
|
Separation
size
|
47~76μm
|
||
|
Bottom
shaker screen
|
1.0m2(600×1600mm)
Optional
|
||
SERVICE ＆GUARANTEE OF OGEM
1. According to client requirements, OGEM will provide
optimal solutions at earliest time. 2. All OGEM
equipments will have one year guarantee after commissioning date
except wearing parts and illeagle
operation.
3. As per user demand, OGEM can arrange
engineer do 1st commissioning for free. We can also provide training courses to
client
staff.
4.The time to client job site depend on visa issuance. Anyhow, we will do our
best to solve emergency as soon as we
can.
5. OGEM have considerable stock to stare various spare parts. This guarantees
the spare parts can be sent to the clients in time.
ABOUT OTHER PRODUCTS
OF OGEM EQUIPMENT
Shale shaker, mud cleaner, decanter centrifuge, centrifugal pump, mud agitator, mud mixing pump,
shearing pump, degassers, flare ignitor, mud tanks,whole drilling mud process system, etc.
Complete spare parts, such as shaker screen, hydrocyclone cone, hopper, motor, bare pump, valve,
rig matting, pipeliens, piperack etc.
As well as high pressure BOP hose, rotary/drilling hoses, choke and kill hose, high pressure flexible hoses, flanges, unions, etc.
shearing pump, degassers, flare ignitor, mud tanks,whole drilling mud process system, etc.
Complete spare parts, such as shaker screen, hydrocyclone cone, hopper, motor, bare pump, valve,
rig matting, pipeliens, piperack etc.
As well as high pressure BOP hose, rotary/drilling hoses, choke and kill hose, high pressure flexible hoses, flanges, unions, etc.
Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!
没有评论:
发表评论