2014年1月14日星期二

High Quality And Inexpensive Mud cleaner in Oilfield from OGEM

In oilfield drilling mud process, mud cleaner is important equipment. Mud cleaner is also called mud conditioner or shaker cleaner.
Oilfield mud cleaner general
  • Some people said mud cleaner is firstly invented by a German in the late 1800s. Nowadays, thousand years later, the mud cleaner cannot be only used in oilfield mud process but also in other drilling fluid process, including HDD, Pilling, tunneling, shielding, CSM exploration, etc.

  • A mud cleaner is can be desander?and/or desilters mounted over a shaker with fine screen. Drilling mud is fed to the inlet of the hydrocyclone?(desander and desilter) to separate particles and the underflow passes to the fine screen mesh where in particles larger than barite?are discarded and thrown away.
ajnj mud cleaner_conew1
Mud cleaner desilter process and purpose
1. In most drilling operations, Desilter cone mud cleaner will be mounted on mud tanks after desander or combine desander together as cleaner set after shale shaker and vacuum degasser.
2. We’ll match charging pump for feeding drilling mud to desilter cones achieve further separation or purification.?The weighted mud under pump pressure or force flows to the inlet head section of the desilter entering the hydrocyclones for separation of particles.
3. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite size particles to pass through the screen returning and recovering then the clean mud.
4. Usually, if we drill shallow well or we don’t drill oil and gas well, after desilter process, we don’t need further step for example, the decanter centrifuge. Since, desilter can get solids larger than 15 microns out of drilling fluid.
5. Our purpose of the desilter?or?mud cleaner?operation is to remove drilled solids larger than barite. Solids larger than 15-46 micrometers can be removed by the desilter cones before the viscosity builds up.
Oilfield Mud cleaner
Oilfield mud cleaner desilter cones type
The polyurethane material provides high durability and excellent anti-corrosive feature. Commonly, we adapt 4″ desilte cone. Sometimes, clients also request 2″ cones to process small quantity drilling mud with finer particles
To provide convenience on cones replacement, more and more desilter cone manufacturer begins producing clamped type desilter cone instead of former flange type cones.
Hydrocyclone cone

If you have any question or demand on desilter cone or mud cleaner please contact us freely. We can give you customizable proposal. OGEM will supply you products at lower cost and shortest delivery.

Any requirements, please contact with us freely!
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
                                                     
Need any lateast news about the Hydrocyclone desender or other oilfield equipment,please enter in our website. WELCOME!!!

没有评论:

发表评论