Definition
Dilling fluid solids control mud cleaner, is the second class and third class solids control equipment in the drilling mud process system, it includes the desander, desilter, pressure pump, cyclone, underflow trough, drilling fluid shale shaker, bracket and base.
A mud is fed to the inlet of the hydrocyclone (desander and/or desilter) to separate particles and the underflow passes to the fine screen mesh where in particles larger than barite are discarded and thrown away. In most drilling operations, a mud cleaner is installed in its mud systems. It is usually located in a mud tank in the same location as with the desilters.
Characters
Its characteristics lies in the desander and desilter main into the pipe and the liquid between a control butterfly valve, the base is equipped with the chute, the vibrating screen is located on the chute, cyclone with automatic sand control device and bottom adjusting device.
Apply the new structure is compact, easy to use, easy maintenance, reliable operation, can quickly remove harmful solid phase of drilling fluid, improve drilling fluid performance, to meet the requirements of the new technology of high pressure jet drilling.
Functions
The purpose of the mud cleaner is to remove drilled solids larger than barite. Solids larger than 74-105 micrometres can be removed by the mud cleaner before the viscosity builds up. Mud cleaner can effectively control weighted drilling fluid solid content. Prevent differential pressure sticking, adhesion stuck drill accident, reduce the drill string and the filter cake thichness on bond issues.
Mud cleaner is characterized by cyclone group by 1, 3 high wear-resistant polyurethane and 8-16 desander hydrocyclone high wear-resistant polyurethane cyclone are arranged combination, the overflow pipe and the feeding tube diameter is larger, the cone Angle smaller; Mortar to institutions with a center shaft fixed together can tilt the metal tank to control the flow of slurry; Circular permutation group of hydrocyclone used with rectangular recovery of vibrating screen.
Benefits
Due to the above characteristics of the utility model are enhanced ability to deal with mud slurry, drilling cuttings could improve the separation efficiency, simple structure, low cost, esay move, install and use is very convenient.
It’s the ideal device of the second and third solids control system. When you need, just contact !
4. ISO 9001:2008 certificate
5. Offer free guarantee and training courses
Dilling fluid solids control mud cleaner, is the second class and third class solids control equipment in the drilling mud process system, it includes the desander, desilter, pressure pump, cyclone, underflow trough, drilling fluid shale shaker, bracket and base.
A mud is fed to the inlet of the hydrocyclone (desander and/or desilter) to separate particles and the underflow passes to the fine screen mesh where in particles larger than barite are discarded and thrown away. In most drilling operations, a mud cleaner is installed in its mud systems. It is usually located in a mud tank in the same location as with the desilters.
Characters
Its characteristics lies in the desander and desilter main into the pipe and the liquid between a control butterfly valve, the base is equipped with the chute, the vibrating screen is located on the chute, cyclone with automatic sand control device and bottom adjusting device.
Apply the new structure is compact, easy to use, easy maintenance, reliable operation, can quickly remove harmful solid phase of drilling fluid, improve drilling fluid performance, to meet the requirements of the new technology of high pressure jet drilling.
Functions
The purpose of the mud cleaner is to remove drilled solids larger than barite. Solids larger than 74-105 micrometres can be removed by the mud cleaner before the viscosity builds up. Mud cleaner can effectively control weighted drilling fluid solid content. Prevent differential pressure sticking, adhesion stuck drill accident, reduce the drill string and the filter cake thichness on bond issues.
Mud cleaner is characterized by cyclone group by 1, 3 high wear-resistant polyurethane and 8-16 desander hydrocyclone high wear-resistant polyurethane cyclone are arranged combination, the overflow pipe and the feeding tube diameter is larger, the cone Angle smaller; Mortar to institutions with a center shaft fixed together can tilt the metal tank to control the flow of slurry; Circular permutation group of hydrocyclone used with rectangular recovery of vibrating screen.
Benefits
Due to the above characteristics of the utility model are enhanced ability to deal with mud slurry, drilling cuttings could improve the separation efficiency, simple structure, low cost, esay move, install and use is very convenient.
It’s the ideal device of the second and third solids control system. When you need, just contact !
ABOUT US
1.Our factory is more than 21000 squre meters
2. Own more than 200 workers and 50 professional R&D persons of 20-year experience in petroleum industry, especially mud process equipments
3. 20 year experence manufacturer on oil and gas drilling mud process4. ISO 9001:2008 certificate
5. Offer free guarantee and training courses
6.Have stock all the year to offer convenience to our customers.
7.Can be customized, OEM is welcome
8.We attend solid control fair: CIPPE 2012 BeiJing, NOG 2012, Guangzhou trade fair
没有评论:
发表评论