DRILLING FLUID MUD GAS SEPARATOR----WHAT IT IS?
Drilling fluid mud gas separator is one kind of drilling fluid equipment. It mainly get rid of invaded gas and remove large pocket of gas to keep well drilling and rig safe. As we said mud/gas separators and degassers mechanically remove entrained gases such as hydrogen sulfide, carbon dioxide and natural gas from the mud system. Entrained gas can reduce the hydrostatic head of the mud column and can cause catastrophic well control problems.
HOW DRILLING FLUID MUD GAS SEPARATOR WORK?
Drilling fluid mud gas separator is commonly called a gas-buster or poor boy degasser. It captures and separates large volume of free gas within the drilling fluid. If there is a "KICK" situation, this vessel separates the mud and the gas by allowing it to flow over baffle plates. The gas then is forced to flow through a line and vent it to a flare. A "KICK" situation happens when the annular hydrostatic pressure in a drilling well temporarily (and usually relatively suddenly) falls below that of the formation, or pore, pressure in a permeable section downhole, and before control of the situation is lost.
THE PRINCIPLE OF OPERATION ABOUT THE DRILLING FLUID MUD GAS SEPARATOR
The principle behind the ''' drilling fluid mud gas separator ''' is relatively simple. On the figure, the mud and gas mixture is fed at the inlet allowing it to impinge on a series of baffles designed to separate gas and mud. The free gas then is moved into the flare line to reduce the threat of toxic and hazardous gases and the mud then discharges to the [[shale shaker]] and to the tank.
THE TYPES OF DRILLING FLUID MUD GAS SEPARATOR
The principle of drilling fluid mud gas separator for different types of vessels is the same.
* Closed bottom type
* Open bottom type
* Float type
According to pedestal or base type there are
* Fixed type
* Elevating type
Drilling fluid mud gas separator in China is usually named according to vessel diameter.So the type also including
* FLQ800 or ZYQ800
* FLQ1000
* FLQ1200
* FLQ1400
Usually, the degasser type or configuration is customizable
WANT MUD GAS SEPARATOR, CONTACT OGEM
THE GENERAL INTRODUCTION OF OGEM FLQ SERIES MUD GAS SEPARATOR
1. FLQ Series poor boy degasser is the initial equipment to separate out invaded gas. Mainly get rid of air bubble large than 3mm.
2. This equipment is simplified design, high efficient, convenient to install and operate. It is important safety device to prevent blowout in oilfiled.
3.OGEM equipment is professional manufacturer on hiqh quality degassers including mud gas separator and gas buster. The quality and standard is according to ISO9001-2000. Find more oil and gas mud equipments at OGEM.
THE FEATURES OF THE OGEM DRILLING FLUID MUD GAS SEPARATOR
1.Large effective vessel capacity
2.Removal of dangerous H2S and other poisonous gas
3.Baffle plates in vessel
4.Customizable specification
5.Backpressure manifold with flare ignition line
6.Effective U-tube or mud seal configuration
7.Skid-mounted design with lay down legs
8.Optional elevating type
THE BENEFITS OF OGEM DRILLING FLUID MUD GAS SEPARATOR
1.High process efficiency during continued drilling
2.Promotes safe drilling environment
3.Efficient removal of free gas
4.Built to match drilling program and application
5.Control delivery of gas to the flare line
6.Control of retention time of gas-cut mud in the vessel
7.Optimizes process effectiveness and efficiency
8.Easy transportation, rig-up and rig-down
9.Adaptable for different drilling height or other conditions
THE TECHNICAL PARAMETER OF OGEM MUD GAS SEPARATOR
Model FLQ 800 FLQ1000 FLQ1200
Vessel diameter Ø800mm Ø100mm Ø1200mm
Treating capacity 240m3/h 300m3/h 380m3/h
Feed inlet 5" 5" 5"
Fluid discharge 8" 10" 10"
Vent line 8" 8" 8"
Weight 1650kg 2000kg 3200kg
Dimension 1900×1900×5700mm 2000×2000×5860mm 2200×2200×6634mm
•
Service &Guarantee of OGEM Equipment
1. Before service: According to client requirements, OGEM will provide optimal solutions at earliest time.
2. After service: All OGEM equipments will have one year guarantee after commissioning date except wearing parts and illeagle operation.
3. Commissioning: As per user demand, OGEM can arrange engineer do 1st commissioning for free. We can also provide training courses to client staff.
4. Emergency solution: The time to client job site depend on visa issuance. Anyhow, we will do our best to solve emergency as soon as we can.
5. Sapre parts supply: OGEM have considerable stock to stare various spare parts. This guarantees the spare parts can be sent to the clients in time.
About Us
1.Our factory is more than 21000 squre meters
2. Own more than 200 workers and 50 professional R&D persons of 20-year experience in petroleum industry, especially mud process equipments
3. 20 year experence manufacturer on oil and gas drilling mud process
4. ISO 9001:2008 certificate
5. Offer free guarantee and training courses
6.Have stock all the year to offer convenience to our customers.
7.Can be customized, OEM is welcome
Contact OGEM
Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
Website: http://www.ogemsolidscontrol.com/
没有评论:
发表评论