2014年5月4日星期日

The decanter centrifuge is mainly used to control the density and viscosity of drilling fluid

The decanter centrifuge is mainly used to control the density and viscosity of drilling fluid, decrease the content of the solid phase, remove the hazardous solid phase, recycle the heavy spar, regain the left of whirling current separator to guarantee the good performance of drilling fluid and increase the speed of drilling.
1.Centrifuges to be installed on top of the new entrance to the tank away from the drilling pump, can also be arranged according to the actual situation.
2.Frequently check the fasteners are tightened, and lubrication of lubricating parts.
3.The top-long centrifuge should be cleaned rollers and conveyor to have a confirmation no jamming before boot.

4. Machine operation should idling for 10-15 minutes, confirm centrifuge normal operation, then open the pump for a small to large amount of slurry, adjusted to a suitable date.
5.if the drilling fluid viscosity is too high, should be appropriately adding dilution water, to reduce viscosity, to accelerate the solid phase precipitation speed, improve the processing capability of the centrifuge.
6. All safety protection guards shall be installed before starting up. It is forbidden to open the guards of decanter centrifuge to observe the running state of the machines.
7. During the operation of the decanter centrifuge, don’t touch the moving parts and rotation parts.
8. It is forbidden to brake in any way before the decanter centrifuge is stopped.
9. If there is abnormal noise and vibration, close down decanter centrifuge immediately and make troubleshooting.
10. It is forbidden to have the decanter centrifuge running at the rotating speed out of active speed that indicated in the instruction and nameplate.
OGEM machinery exclusively handle oil & gas drilling fluids solids control equipment and solids control system  solids control  solids control equipment  drilling fluid cleaning system   shale shaker    desander  desilter  decanter centrifuge  centrifuge centrifugal pump   mud cleaner   vacuum degasser   Hydrocyclone cone    mud agitator    flare igniter     submersible slurry pump  mud tank    mud gas separator   Jet Mud Mixer    mud mixing pump   mud gun  screw pump    Shale Shaker Screen    shearing pump   Vertical Cutting Dryer, etc. OGEM has been serving the oil & gas industry for 10 years since its establishment in 2008, and has obtained good experience on equipment manufacturing & oilfield service.
OGEM solids control is main professional manufacturer of solids control system in China, OGEM  is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment  shale shaker,you can contact us online.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: 
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei 
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
       Info@OGEMSolidsControl.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee   
Facetime:bigshowlhc@163.com                             


http://www.hbequipments.com/sell-shale_shaker-829035.html
http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html
http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html
http://www.hbequipments.com/sell-decanter_centrifuge-830036.html

没有评论:

发表评论