2014年5月6日星期二

Vacuum degasser used in solids control system for sale

Usually,we use some kinds of solids control equipments to remove the harmful particles in the drilling fluids,including mud tank, drilling mud shale shakerdesander  desilter  decanter centrifuge  centrifuge centrifugal pump   mud cleaner   vacuum degasser   Hydrocyclone cone    mud agitator    flare igniter     submersible slurry pump  mud tank    mud gas separator 
  Jet Mud Mixer    mud mixing pump   mud gun  screw pump    Shale Shaker Screen    shearing pump   Vertical Cutting Dryer. They are combined to five stages as a complete drilling mud system.Drilling mud shale shaker is used to separate the big solids with diameter above 75μm, and 45~74μm for desander, and 15~44μm for desilter. Sometimes desander & desilter are combined as high efficient mud cleaner. When air enters into the drilling fluids, vacuum degasser is used to separate the air. If no air in the mud, the degasser would work as a big agitator. All these equipments are mounted on the top of the mud tank. After separating the solids, the clean mud would be pumped into the borehole again.

Vacuum degasser ranks as the second stage of solids control system. The drilling mud that are separated by the first stage device — shale shaker flows into the setting compartment of the mud tank. The drilled cuttings would settle into the setting pit, and the drilling fluids would flow over and into the second compartment. A sand pump would be used to pump the drilling mud from the second compartment up to the vacuum degasser, The drilling mud enters into the vacuum tank through the feeding pipe, and rotates by the rotor of the degasser, by the effect of centrifugal force, the drilling fluids would be threw to the inner wall of the vacuum tank, and the gases that migrate into the mud would be separated from the mud. Vacuum layer would be generated by the vacuum pump that are mounted on the skid of degasser, so the gases that are separated would be pumped out to the water-gas separator by the vacuum pump and be discharged through the relief linepipe and finally be flared by the electrical ignition device at a place that are 60 to 80 meters away from the drilling rig.
The degassing machine is used to clean up the gas in the drilling fluid, ensuring the performance of drilling fluid relatively stable and the proper functioning of swirler. It is the second level equipment in solid control system, and it will be set between shale shaker and drilling mud cleaner/desander.

Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: 
OGEM Solids Control)
Address: NO.2 Jingxi Road,Lunan District,Tangshan city,Hebei 
province,China
Tel: 86-315-8676484
Fax: 86-315-2648099
Zip Code: 063000
Email: ogem2@ogemsolidscontrol.com
       Info@OGEMSolidsControl.com
Website: http://www.ogemsolidscontrol.com/
Skype:burning_lee   
Facetime:bigshowlhc@163.com                             

OGEM solids control is main professional manufacturer of solids control system in China, OGEM  is a vital part of the world hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China, which offers its products for CNPC, CNOOC ,HH, Gazprom, RG, etc . If you want to know more information about solids control system and oil drilling solids control equipment  shale shaker,you can contact us online.
http://www.hbequipments.com/sell-shale_shaker-829035.html
http://www.hbequipments.com/sell-hydrocyclone_desander-829178.html
http://www.hbequipments.com/sell-hydrocyclone_desilter-829219.html

http://www.hbequipments.com/sell-decanter_centrifuge-830036.html

没有评论:

发表评论